Skip to Store Area:

CAP TODAY Product Guides

Chrono-log Corp., Optical Aggregation Systems Models 490 4+, 490 4+4 (Coagulation 2018)

Chrono-log Corp., Optical Aggregation Systems Models 490 4+, 490 4+4 (Coagulation 2018)

Coagulation analyzers, January 2018

Contact Information

Chrono-log Corp.
Kathy Jacobs
jacobs@chronolog.com
2 West Park Rd.
Havertown, PA 19083
610-853-1130 or 800-247-6665


Instrument name/First year sold Optical Aggregation Systems Models 490 4+, 490 4+4/2017
Number of units installed in U.S./Outside U.S.
Number of contracts signed between 1/1/17 and 11/15/17
Country where analyzer designed/Manufactured U.S./U.S.
Operational type batch, random access
Reagent type open reagent system (lyophilized, reconstituted manually)
Operates on whole blood or spun plasma spun plasma
Sample handling system manual
Model type benchtop
Dimensions (H × W × D)/Weight/Instrument footprint for each 4-channel module: 8.5 × 14 × 15 in/19.3 lbs/1.5 sq ft
FDA-cleared clotting-based tests
FDA-cleared chromogenic tests
FDA-cleared immunologic tests
Other FDA-cleared tests LTA aggregation, ristocetin cofactor assay
User-defined tests in clinical use LTA aggregation, ristocetin cofactor assay
Tests submitted for 510(k) clearance
Tests in development but not yet submitted
Methodologies supported turbidimetric; LTA aggreg., ristocetin cofactor assay
Operator must load sep. reagent pack per specimen/Test run no/no
Number of different measured assays onboard simultaneously 4–8
Number of different assays programmed and calib. at one time 4–8
Number of user-definable (open) channels 4–8
Of those defined, number active simultaneously 4–8
Factor assays require manual manipulation or dilutions
Number of reagent containers onboard at once/Tests per container/Reagents refrigerated onboard —/—/no
Multiple reagent configurations supported yes
Reagents, consumables loaded without interrupting testing yes
Same capabilities when third-party reagent used yes
Maximum time same lot number of reagents can be used 12–30 months
Walkaway capacity: Number of specimens/Number of tests 4–8/4–8
Minimum sample volume aspirated precisely at one time 250 µL
Standard specimen volume required to run PT or PTT/ Factor VIII activity
Disposables used/Price of each cuvettes: 144 @ $45; stir bars: 144 @ $35; pipette tips: $85, $67, and $73
Supports direct-from-track sampling no
Primary tube sampling supported/Pierces caps on primary tubes no/no
Sample barcode reading capability no
Reagent barcode reading capability no
Onboard test automatic inventory no
Measures No. of tests remaining/Short sample detection no/no
Clot detection as preanalytical variable in plasma sample no
Auto. detects adequate reagents for aspiration and analysis no
Hemolysis/Turbidity detection-quantitation no/—
Dilution of patient samples onboard no
Automatic rerun capability/Auto reflex testing capability yes/no
Lag time during which hypercoagulable sample not detected
Read time extended for prolonged clotting times yes
User can set different-than-standard:
• Reagent volumes/Sample volumes yes/yes
• No. and sources of reagent yes
• Incubation times/Reading times yes/yes
Autocalib. or autocalib. alert/Multipoint calib. supported yes/yes
Auto shutdown/Auto startup programmable no/no
Stat time to complete all analytes/Throughput per hour for:
• PT alone
• PT, PTT
• Fibrinogen
• Factor VIII activity assay
Time delay from ordering stat to aspiration of sample
Automatic transfer of QC results to LIS no
Data-management capability onboard
Interface supplied by instrument vendor yes
Interfaces in active user sites for:
Bidirectional interface capability no
Results transferred to LIS as soon as test time complete no
LOINC codes transmitted with all results no
How labs get LOINC codes for reagent kits email query
Electronic interface available (or will be) to automated (or robotic) specimen handling system no
Modem servicing no
Time required for maintenance by lab personnel 30 minutes when optical calibration required
Onboard maintenance records yes
Training provided with purchase
Approximate number of training hours needed per tech
List price M490 4+: $11,800; M490 4+4: $20,700
Annual service contract cost (24/7)/Warranty with purchase M490 4+: $1,804; M490 4+4: $3,008 for 3 years/1 year
Distinguishing features (supplied by company) continuously monitors temperature and stirring with warning messages; optical calibration by laboratory personnel; Windows-based software provides customized color-coding options
Note: a dash in lieu of an answer means company did not answer question or question is not applicable
All information is supplied by the companies listed. The tabulation does not represent an endorsement by the CAP.